International Crystal Laboratories
International Crystal Laboratories
11 Erie Street
Garfield, NJ 07026
Phone: 973.478.8944
Fax: 973.478.4201
Email: ICLMail@internationalcrystal.net
Print Back
ICL's Basics™ Horizontal ATR is a high performance accessory that is easy on your lab budget. In its standard configuration the sample is placed into a large trough sample area that can be used for analysis of liquids, pastes, films and powders. Sample preparation is minimal. You simply place your sample into the easily removable top plate so that it sits in the trough above the ATR crystal. An optional flat top plate configuration is available if you intend to sample a lot of powders and films. The flat top plate enhances the contact between the surface of the ATR crystal and the sample when used in conjunction with the clamp that allows you to apply pressure to the sample. In designing the Basics™ Horizontal ATR we have eliminated some of the problems associated with earlier designs in which the ATR crystal prism is held in place with epoxy. In both the trough and the flat plate configuration the optics of the BasicsTM Horizontal ATR are held in place mechanically, or with an indium seal. This accessory also features Constant Purge™, which allows sampling without breaking the nitrogen or dry air purge of your spectrophotometer.

When ordering, please specify the make and model of your spectrophotometer.(Please select the Request Information Button)
Unit of Measure

Additional Information

N/A An optional flat top plate configuration is available if you intend to sample a lot of powders and films. The flat top plate enhances the contact between the surface of the ATR crystal and the sample when used in conjunction with the optional clamp that allows you to apply pressure to the sample. A powder press is also available to fit the trough top plate configuration for powder sampling.

In designing the Basics™ Horizontal ATR we have eliminated some of the problems associated with earlier designs in which the ATR crystal prism is held in place with epoxy. In both the trough and the flat plate configuration the optics of the Basics™ Horizontal ATR are held in place mechanically, or with an indium seal. This accessory also features Constant Purge™, which allows sampling without breaking the nitrogen or dry air purge of your spectrophotometer. We have also introduced heated and micro flow-through top plates for this accessory. For flow through applications, see Precision Dispenser pump.