Request Information

For this cell, you must specify (i.) the path length, (ii.) whether or not calibration is required and (iii.) whether or not calibration and matching is required (see below). This cell has a rectangular (Dispersive) aperture.
With removable and interchangeable sealed sandwich cell comprising two (2) 32mmx3mm windows and a needle plate or pin plate with two (2) luer fittings. Separate cell mount (included) can double as a demountable cell with extra needle plate (#0006-4121 & 0006-4123).

A calibration charge of $23.40 is automatically added to the price of the cell, unless the customer expressly specifies that calibration is not required. Pathlengths for cells that are not calibrated are nominal and ICL assumes no responsibility for the customer's inability to calibrate the cell or for the failure of an uncalibrated cell to exhibit satisfactory fringing.

Add $23.40 for cell calibration (0010-186), $53.00 per cell for calibration and matching of .05mm, .1mm, .2mm, .5mm and 1mm cells (0010-185) and $78.00 per cell for calibration and matching of .015mm and .025mm cells (0010-7901). If you require calibration or calibration and matching and do not list it as a separate line item, the applicable charge will be charged to your credit card and will appear on your final invoice as a separate line item.

Unit of Measure

Pathlength

 N/A 0.015 mm0.025 mm0.05 mm0.1 mm0.2 mm0.5 mm1.0 mm

Cell Calibration

 N/A Calibration Calibration and Matching No calibration

Aperture

 N/A Circular Aperture - FTIR

Material

 N/A Infrasil Quartz

N/A These cells come assembled with a leak-proof seal which is obtained by mercury amalgamating the luer lok syringe/pin plate to both the lead gasket and the window, thereby permitting the entire sealed window assembly to be removed with the ease normally associated with a demountable cell. Additional sealed sandwich spectrophotometer cells can be used with the same cell mount if a variety of pathlengths are required. Demountable SL-2 cells are also available.

The SL-2 is available in dispersive and FTIR configurations. The price of the cell in the sealed cell configuration includes both the mount and the sandwich cell that fits in the mount. Not recommended for .015mm and .025mm pathlengths.

Part numbers which end with the letter "W" are nominal part numbers only and are used online simply to identify the cell type and window material. Part numbers which end in "W" do not denote a specific path length. We will assign the correct part number when you place your order. If you want confirmation of the correct part number please request it when you call in your order or request an on-line e-mail confirmation of the correct number.

Note: Add $14.00 for cell calibration, $32.00 each for spectrophotometer cell matching and $50.00 each for matching of 0.015mm & 0.025mm SL-2 spectrophotometer cells.