Request Information
  • Specular Reflectance Accessory

    ICL’s Basics™ 30° specular reflectance accessory is useful for non-destructive analysis of anything that will not transmit infrared energy. Typical applications are analysis of films and coatings and measurement of the thickness of free standing films with known refractive indices by fringe pattern analysis. The accessory is mounted on the standard universal 2” x 3” slide mount of any FTIR instrument. The mirrors of the accessory direct the infrared beam at the sample at an angle of incidence of 30 degrees. Mirrors are first surface coated with aluminum. The sample is placed face down on the sample stage at the top of the accessory for analysis. A set of three masks with small apertures is provided for use with small samples. A gold coated “alignment” mirror is provided to enable you to take background scans and for alignment of the mirrors to optimize energy throughput.

    Basics™ 45° Specular Reflectance Accessory

    The high energy HATR is equipped with a 45° specular reflection stage, making this versatile unit useful for double duty as a specular reflection accessory.

  • Specular Reflectance Grazing Angle Accessory

    The 80° Specular Reflectance Grazing Angle Accessory is designed for use in FTIR spectrophotometers for the measurement of monolayer films on metallic substrates and for characterization of samples that cannot be analyzed by other techniques because they do not transmit IR radiation.
    The IR beam of the spectrophotometer is reflected at the input mirror to strike the sample at an incident angle of 80°, which is as close as can be achieved with a modestly priced accessory to the optimal grazing angle slightly less than 90°. Sensitivity can be enhanced significantly by combining this accessory with a wire grid polarizer using the built-in slide mounts.
    The accessory is prealigned and ready to use. The sample is placed face down on the top surface of the accessory. Slides are built in to each end of the accessory to permit mounting of a polarizer. Optics are gold coated to maximize grazing angle throughput. A gold coated 'alignment' mirror is provided to enable you to take background scans and to optimize transmission using the adjustment screws for the mirror system.