Our SL-4 cell is now available in both demountable and sealed cell configurations that are purgeable while the cell is in the instrument, by using a Constant Purge™ bellows attachment (0005-7404). Unlike conventional sealed cells which have luer fittings on the front plate, the purgeable SL-4P has luer lock filling ports that are mounted on the top and side edge of the 1/4' thick front plate of the cell. This construction allows the optical path of the spectrophotometer to be purged with nitrogen while it is in the sample compartment of the instrument, as the placement of the luer fittings facilitates the clean interface of a telescopic purge chamber to the front plate.
Unit of Measure

Pathlength

N/A 0.015 mm0.025 mm0.05 mm0.1 mm0.2 mm0.5 mm1.0 mm

Material

N/A KCl

N/A Unlike conventional sealed spectrophotometer cells which have luer fittings on the front plate, the purgeable SL-4P has luer lock filling ports that are mounted on the top and side edge of the 1/4 inch thick front plate of the cell. This construction allows the optical path of the spectrophotometer to be purged with nitrogen while it is in the sample compartment of the instrument, as the placement of the luer fittings facilitates the clean interface of a telescopic purge chamber to the front plate.

Part numbers which end with the letter "W" are nominal part numbers only and are used online simply to identify the cell type and window material. Part numbers which end in "W" do not denote a specific path length. We will assign the correct part number when you place your order. If you want confirmation of the correct part number please request it when you call in your order or request an on-line e-mail confirmation of the correct number.